Import Unsupported CID Patterns into Revit using IFC

David Ronson

All, Revit, CADmep, fabrication 1 Comment

Often times, people who are working in CADmep are finding out late that their deliverable needs to be in Revit. Here is a tutorial on how to import the unsupported patterns of CADmep into Revit.

Lost!!! Remote Entry Utility Bar

Garrett Tice

All, autodesk, CADmep, ESTmep, CAMduct, fabrication, Remote Entry Leave a comment

This video will display the process of retrieving your lost utility bar inside of Fabrication Remote Entry. Unlike CAMduct or ESTmep, there is no easy way to retrieve it once it has been closed out…

Design Line Node Buttons

Scott Hendricks

All, autodesk fabrication, CADmep, ESTmep, Design Line, fabrication Leave a comment

New tricks to make modeling with Design Line easier.

Group By Option- Fabrication 2017

Garrett Tice

All, autodesk, CADmep, ESTmep, CAMduct, fabrication Leave a comment

This video will display the new Group by Option within Fabrication 2017, allowing you arrange the items within a job based off of certain criteria. Check it out and leave me your feedback!

CADmep Placing Level and Size Tags

Lyle Janda

All, CADmep, fabrication Leave a comment

Learn how to place Level/Size Tags on Connector 1 or Connector 2 using Fabrication CADmep.

Metal Cut Files Vs Liner Cut Files

Garrett Tice

All, autodesk, CADmep, ESTmep, CAMduct, fabrication Leave a comment

I am often asked the best way to distinguish which cut files are for liner tables vs which are for plasmas. This video will display my suggested setup inside of CAMduct to handle liner files vs metal…

Fixed Design Line Nodes

Scott Hendricks

All, CADmep, Design, Design Line, fabrication Leave a comment

Adding fall to a Design Line is a fairly simple task but here is a trick to make sure your Design Lines stay connected to your equipment after applying fall to it.

Customizing Takeoff Information and Custom Data Per Item

Garrett Tice

All, CADmep, ESTmep, CAMduct, custom data, fabrication, takeoff information Leave a comment

This video will demonstrate how to apply Custom Data and Takeoff Information directly to each individual piece if it differs from a standard:

Converting Revit Equipment to ITM files

Lyle Janda

All, CADmep, ESTmep, CAMduct, fabrication 1 Comment

Watch this video to learn how to download, export and convert Revit Families to ITM files. This process can be done in Fabrication ESTmep or CADmep.

Autodesk University 2016 FAB Classes

Lyle Janda

All, autodesk university, CADmep, ESTmep, CAMduct, fabrication Leave a comment

Please join me at Autodesk University 2016, November 15-17, and the MEP and Structural Fabricators Forum (MSF), November 14, in Las Vegas:

1 2